HSK40A-HDC07A-75

TEST-2

HSK40A-HDC07A-70 collet chuck/holder

Shank: HSK40A

Projection/Gauge length: 75mm (4.134″)

Capable of holding between 0.5mm to 7.0mm (0.020″ to 0.276″) cutting tool shank

Use FDC-07 collet series. No direct chucking. FDC collet must be used with this holder.

0.007mm (0.0003″) at 4d, 0.002mm (less than 0.0001″) at TI.I.R.

Capable up to 20,000rpm