HSK40A-HDC07A-90

CAT40-HDC07A-105 collet chuck/holder.

Shank: CAT40

Projection/Gauge length: 105mm (4.134″)

Capable of holding between 0.5mm to 7.0mm (0.020″ to 0.276″) cutting tool shank.

Use FDC-07 collet series. No direct chucking. A collet must be used with this holder.

0.007mm (0.0003″) at 4d, 0.002mm (0.0001″) at T.I.R.

Capable up to 20,000rpm.