C5
C5-HDC07A-90
Product #: 675000507090
Shank Type
Chucking Range
0.5mm ~ 7mm, 0.020" ~ 0.276"
Projection/Gauge Length
90
Wrench
S-0
C5-HDC07A-105 collet chuck/holder.
Shank: C5
Projection/Gauge length: 105mm (4.134″)
Capable of holding between 0.5mm to 7.0mm (0.020″ to 0.276″) cutting tool shank.
Use FDC-07 collet series. No direct chucking. A collet must be used with this holder.
0.007mm (0.0003″) at 4d, 0.002mm (0.0001″) at T.I.R.
Capable up to 20,000rpm.
