UTS6350
UTS6350-HDC07A-120
Product #: 126010207120
Shank Type
Chucking Range
0.5mmmm ~ 7.0mmmm, 0.020"" ~ 0.276""
Projection/Gauge Length
120
Collet Sleeve
FDC-07
Wrench
S-0
Preset Screw
HDS-07
Nut Cap
HDP07A
CAT40-HDC07A-105 collet chuck/holder.
Shank: CAT40
Projection/Gauge length: 105mm (4.134″)
Capable of holding between 0.5mm to 7.0mm (0.020″ to 0.276″) cutting tool shank.
Use FDC-07 collet series. No direct chucking. A collet must be used with this holder.
0.007mm (0.0003″) at 4d, 0.002mm (0.0001″) at T.I.R.
Capable up to 20,000rpm.
